close
Menu
undefined

635FCombine Header

  • Cutting width 10.70m
  • Float range: 152.4 mm
  • lowest cutting height: 38mm
  • Cutter bar knife speed 1024 strokes/min
  • Optional Rape extension
null

Floating cutter bar for uneven ground

The 600F header with the floating cutterbar runs faster and cuts cleaner on uneven ground for reduced losses in down or tangled crops. The 600F is available from 6.10 m up to 10.70 m. While the design of the frame, drives, auger and stainless steel feed plates is similar to the 600R the flex technology completely different. It is not just a converted grain header with added flexibility on the cutterbar. The whole header is the result of decades of know how in soy bea and peas.

Specifications

Select up to 4 models to compare specifications

John Deere

635F

Combine Header

Key Specs

Overall width11.2 m
36.7 ft
Cutterbar length10.7 m
35 ft
Flex cutterbar float range152.4 mm
6 in.
Tilt adjustment17 degrees (located on feederhouse)
Height controlHydraulic
Speed controlHydraulic

Cutterbar

TypeIn-line gearbox and knife system 10.2 cm
4 in.
Cutterbar angle10 degrees
Cutterbar length10.7 m
35 ft
Flex cutterbar float range152.4 mm
6 in.
Tilt adjustment17 degrees (located on feederhouse)
Knife sectionsHeavy-duty, over-serrated
GuardsForged steel, heat-treated
Backshaft speed520 rpm
Knife speed520

Platform auger

Diameter660 mm
26 in.
Operating speed152 rpm, 135 rpm (slow down), 170 rpm (speedup)

Reel

Number of slats6
Diameter1.067 m
3.5 ft

Reel controls

Height controlHydraulic
Speed controlHydraulic
Operating speeds6 to 44 rpm

Hydraulics

Reel drive system pressure14000 +/- 1000 kPa
2000 +/- 150 psi
Reel fore/aft stroke359 mm
14.1 in.

Dimensions

Cutting width10.7 m
35 ft
Gathering width10.7 m
35.1 ft
Overall width11.2 m
36.7 ft
Approximate weight3003 K
6620 lb
Date collected15-May-2018
635F undefined Lanarkshire undefined DKR Agri Services